NIK 2102
NIK 2102
General properties:
- Metering of active energy in single-phase two-wire circuits of alternating current
- Grade of accuracy - 1,0 according to the GOST 30207 and DSTU IЕC 62053-21
- Nominal voltage: 220 V
- Frequency - 50 Hz
- Nominal electric current intensity – 5A
- Max electric current intensity - 50A or 60А (depending on performance)
- Ingress protection rating - ІР54
- Availability of pulsed output
- Availability of optical port for programming purposes and data reading
- Number of LCD digits - 6+2
- For multiple-tariff performance: to 4 tariffs and 12 time zones with automatic transition to standard time from daylight saving time
- Calibration interval – 16 years
Advantages:
- Number of measuring elements – 1 or 2(shunt and transformer are used as current sensors)
- Extended range of actuating voltage (143V – 253V)
- Installability of control relay with voltage up to 60A (optionally)
- Increased ingress protection rating against constant and variable magnetic fields (CSU-N MFE 40.1.35.110:2005)
- Technology storage according to the grade of accuracy – not less than 50%
- Continuous operation, where U = 380V (up to 24 hours without sacrificing the grade of accuracy)
- Low power consumption
- Transparent shell
- Installability of transparent terminal cover
- Installability on DIN-strip
- Connectivity of external power supply with voltage from 6V to 9V for metering in the absence of circuit voltage (depending on performance)
- Installability of control relay with voltage up to 60A (optionally)
- Indication of magnetic field effect with induction value more than 100 mt
- Indication of magnetic field effect with voltage more than 10 V/m within the frequency range 80-2000 MHz
- Additional service functions: indication of current reverse direction (reverse), misconnections
- Non-volatile storage of events stamped with date and time for multi-tariff performance (for non-tariff performance - date and time are not indicated)
- Possibility of switching off the load of the consumer if the set value is exceeded: the power supply limit, current rate and voltage, the magnetic field effect more than 100 mt and electromagnetic field more than 10 V/m, disconnections due to non-payment
Таблиця виконань
* To get more information about different designs of the equipment, please, refer to the service manual
or call to our support center by telephone +380 44 383-95-75
or call to our support center by telephone +380 44 383-95-75